Teak and Holly Marine Grade Plywood
Front of sheet #1
Typical boat applications include cabinets and interiors. It has also been used with good success for exterior applications such a boat decks, as long as *finishing instructions are followed to a T, however no warranty is available for this application.
*If you
intend to use this on an exterior exposure application you must completely seal
all edges and faces to keep water from penetrating into the plywood. 4 coats of
Smith's clear penetrating epoxy (or equivalent) must be applied to all edges and
2 coats to both faces. A minimum of 10 coats of exterior varnish (Spar varnish
or equivalent) must be applied to all edges with at least 6 coats applied to the
good face and 2 coats on the back. No warranty is available and never use below
the water line.
Return to previous page